Cikkszám: | HAP-AC-LITE-RB952UI-5AC2ND |
Gyártó: | Mikrotik |
Elérhetőség: | Külső raktáron |
hAP ac lite The hAP ac lite is a Dual-concurrent Access Point, that provides Wifi coverage for 2.4GHz and 5GHz frequencies at the same time. Unit is equipped with a 650MHz CPU, 64MB RAM, five 10/100Mbps Ethernet ports (PoE output on port #5), dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11ac 5GHz wireless, USB port for 3G/4G modem and a RouterOS L4 license. We have two versions available - RB952Ui-5ac2nD (International) and RB952Ui-5ac2nD-US (USA). RB952Ui-5ac2nD-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. RB952Ui-5ac2nD (International) supports 2412-2484MHz and 5150MHz - 5875MHz range. Product specifications Details Product code RB952Ui-5ac2nD CPU nominal frequency 650 MHz CPU core count 1 Size of RAM 64 MB 10/100 Ethernet ports 5 Wireless chip model QCA9887 Wireless standards 802.11a/n/ac Secondary wireless chip model QCA9531 Secondary wireless standards 802.11b/g/n Number of USB ports 1 Power Jack 1 Supported input voltage 10 V - 30 V PoE in Yes PoE out Yes Dimensions 113 x 89 x 28mm Operating System RouterOS Operating temperature range -30 + 70 C License level 4 Antenna gain DBI 2 CPU QCA9531 Max Power consumption 8W USB slot type USB type A Number of chains 1 Storage type FLASH Storage size 16 MB Suggested price $49.95 Wireless specifications 5 GHz TX RX 6MBit/s 23 -93 54MBit/s 20 -75 MCS0 23 -93 MCS7 19 -71 MCS9 16 -63 2.4 GHz TX RX 1MBit/s 22 -96 11MBit/s 22 -89 6MBit/s 20 -93 54MBit/s 18 -74 MCS0 20 -93 MCS7 16 -71 wireless parameters may be limited in software, depending on your local regulatory limitations Included parts 24V 1.2A power adapter Performance test results RB952Ui-5ac2nD QCA9531 (650Mhz) 100M all port test Mode Configuration 1518 byte 512 byte 64 byte kpps Mbps kpps Mbps kpps Mbps Bridging none (fast path) 40.6 493.0 117.4 480.9 217.0 111.1 Bridging 25 bridge filter rules 40.6 493.0 70.1 287.1 70.9 36.3 Routing none (fast path) 40.6 493.0 117.4 480.9 200.8 102.8 Routing 25 simple queues 40.6 493.0 79.6 326.0 90.8 46.5 Routing 25 ip filter rules 40.6 493.0 42.2 172.8 43.2 22.1 All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544) Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results |